FAQs

Frequently asked questions

Get answers to the most common questions about our products and applications.

About Captura

What does Captura actually sell?

We offer a comprehensive electrodialysis product portfolio—from ion exchange membranes (bipolar and cation, with anion membranes in development) to advanced electrodialysis stacks and fully integrated systems.

Applications

What can your technology be used for?

Our technology uses a series of selective membranes and electricity to separate, concentrate, and convert dissolved salts, enabling:

  • Generating acid and base reagents onsite from brine and salt streams
  • Valorizing wastewater into reusable process inputs
  • Refining salts, including lithium, into higher-value chemical products
  • Regenerating sorbents and delivering high-performance ion exchange
  • Enabling long-duration energy storage with acid-base flow batteries
  • Other separation and conversion processes that improve resource efficiency and reduce operating costs
Which industries does your technology serve?

Our membranes and stacks are a proven solution in a growing number of industries, including:

  • Lithium & critical minerals
  • Water treatment
  • Industrial chemicals
  • Carbon capture
  • Energy storage
What types of feed chemistries does your technology work with?

We have proven our technologies on the following feed chemistries:

  • NaCl (0.5 M)
  • Seawater
  • Industrial brines
  • KCl
  • Na₂SO₄
  • LiCl to LiOH
  • Produced water, geothermal and desalination brines
  • Carbonate (from DAC sorbent)

Feed chemistries outside the current qualified range go through our evaluation process. We will review your process chemistries and can run actual or synthetic samples through our numerous pilot systems to obtain actual performance data. Learn more about our optimization and development services.

Membranes

What are bipolar membranes?

A bipolar membrane consists of a cation exchange layer and an anion exchange layer, with a catalyst at the junction between them. Under an applied electric field, that junction splits water into hydrogen and hydroxide ions. In combination with additional ion exchange membranes in a stack, the BPM allows for generation of acid and base directly from a salt solution. It’s the core building block of bipolar membrane electrodialysis (BMED).

What are cation membranes?

A cation exchange membrane allows positively charged ions to pass through while blocking negatively charged ones. In a bipolar membrane electrodialysis (BMED) stack, cation and anion exchange membranes are used to split salt and separate acid and base products. They’re also sold on their own for other electrochemical processes, like electrolysis, that call for selective cation transport rather than water splitting.

What are anion membranes?

An anion exchange membrane allows negatively charged ions to pass through while blocking positively charged ones. In a bipolar membrane electrodialysis (BMED) stack, anion exchange membranes carry the negative ions from your salt, such as chloride, toward the acid stream, while cation exchange membranes carry the positive ions toward the base stream. Together they keep the acid and base products separate. Anion exchange membranes are a critical part of our stacks and will be available for purchase separately in the near future.

Do you provide samples for qualification testing?

Yes. We understand that qualifying a new membrane supplier requires rigorous internal testing. We provide material samples for initial evaluation and support each subsequent stage of qualification, from larger membrane samples through stack-level testing in your pilot systems.

Where do I get the data sheets?

You can see all data sheets here.

Where are your membranes made?

We formulate and produce our polymers in our US facility in Pasadena, California. The membranes are then cast from these polymers with a US based manufacturing partner. Learn more about our membranes.

What if you don’t make the membrane I need?

We start by understanding your feed chemistry and product needs, then tailor operating conditions to fit your application within our existing membrane platform, a solution for most cases. If your chemistry still doesn’t fit, we can adjust or develop new polymer chemistry specific to your needs. Learn more about our optimization and development services.

Stacks

Can one stack system perform more than one process?

The configuration of membranes in your stack determines the processes that can be performed. It is possible to achieve multiple processes within a single stack, increasing your efficiency exponentially. For example, you may be able to combine concentration and conversion within a single stack.

What stack capacities are available?

The BMED stack is available in three sizes: lab-, pilot-, and full-scale. Each size is configurable within a range for cell count. Tell us your throughput target and our technical experts will size it with you.

How do stacks integrate with existing lines?

Captura stacks are designed for seamless integration with your existing process infrastructure. Our technical experts work with your team to align stack sizing, stream connections, and control requirements with your facility — simplifying installation and startup.

What maintenance is required?

Membrane replacement is the primary maintenance event, typically on a two-to-three year cycle depending on operating conditions and throughput. The stack hardware is designed for 10+ years of service. Because stacks are modular, swaps are quick, and in multi-stack installations, one stack can be taken offline and replaced while the rest keep running, so your process doesn’t have to stop.

Can I scale from pilot to commercial without redesigning my stack?

Yes. Our proprietary flow-field design scales from lab units to commercial stacks of 200 cells, so the configuration validated at pilot scale carries forward to commercial operation. As your throughput requirements grow, you can increase capacity by adding stacks rather than redesigning your system.

Optimization and Development

What does an optimization and development project look like?

A project starts with a detailed review of your feed chemistry, process data, and operating targets. We then evaluate your stream in our labs to find the best operating conditions and membrane and stack configuration, and demonstrate performance at pilot scale. From there, we partner with you through the transition to commercial scale. Polymer chemists and technical experts work directly alongside your team at every stage.

How do you decide if I need a new formulation, or if an existing product already works?

We start with your feed chemistry and process requirements. One of our existing membranes may fit, and we’ll tell you that upfront rather than steering you toward a development project you don’t need. If something outside our current catalog is required, we may be able to adapt our formulation to fit your needs.

Ordering

Can I buy just the membranes?

Yes. Our membranes, stacks, and systems are sold independently and as packaged systems.

When will anion exchange membranes be available?

AEM is in development and will be available soon. Performance specifications will be published when validation is complete. In the meantime, contact us — we can discuss what options suit your timeline.

What does the path from lab testing to pilot look like?

The process begins with a technical review. Once a nondisclosure agreement is in place, our team reviews your flow sheet and feed chemistry data to assess fit and prepare a budgetary estimate. If the application is a strong fit, validation typically begins with a single stack integrated into your pilot system. Because our stacks are modular, you can confirm performance at pilot scale before committing to additional capacity.

Can you supply at commercial volume?

Our production facility supports 120,000+ m² of membrane annually, with secured manufacturing partnerships that can scale to millions of m² per year. Supply agreements at commercial volume are available for both membranes and stacks.

Do you sell rolls, or only cut sheets?

Rolls are the standard format, available in up to 55 cm widths for BPM and CEM. Precut sheet formats are also available. Tell us your sizing needs and we’ll work with you to find the format that works.

How are membranes shipped and stored?

Membranes ship as rolls or sheets and are packaged for transit. Handling and storage conditions are in the data sheet for each type.

Do I have to buy a system to buy your membranes?

Membranes and stacks are available as standalone components. A packaged system is an option for programs where integration engineering is unavailable. If you know what you need, start with the specific membrane and stack products.

What’s not included?

The delivered system runs from inlet to product outlet. Civil works and utility connections to the system boundary stay on the customer side, as does integration with your existing plant controls.

Do you build it yourselves or use a partner?

Captura designs the system, produces proprietary membrane polymers in-house, and assembles electrodialysis stacks at our California facility. Membrane casting is performed by a third-party contract manufacturer, while fabrication of the surrounding skid and process equipment is carried out by manufacturing partners we select and oversee.

How long does a system take to complete?

A realistic project schedule depends on scope and configuration. We will give you a timeline once the scope is defined.

What technical support do we get during a project?

Captura provides technical support tailored to each stage of your project, bringing in the appropriate experts in membrane technology, process development, application engineering, and system integration based on your needs. Our specialists work alongside your team from defining requirements through bench testing, pilot qualification, and scale-up.

What support do I get after purchase?

Our technical support continues well beyond installation. Our team assists with installation and commissioning, then conducts regular performance check-ins to confirm your system is operating as expected. When questions arise, our technical experts are always available to help.

Expert to expert

Still have a question?

Our engineers are here for anything the FAQs didn’t cover.